Privacy Policy

Recovery Ring

Material
16mm Steel wire

Weight
310g

Production process
forging

Surface preparation
de-burr

Surface treatment
light oil

Use
Automotive

Comments
Tow eye for Jaguar Land Rover Evoque

Recovery Ring

Material 16mm Steel wire
Use Automotive
Additional information

72mm Fill point

Material
Mild Steel and HDPE

Weight
510g

Production process
Casting & Injection moulding

Surface preparation
dipped to clean

Surface treatment
BZP

Use
2" BSP fuel filling point for oil tank

Comments
Low cost alternative to 2" Lockable Fill Point.

72mm Fill point

Material Mild Steel and HDPE
Use 2" BSP fuel filling point for oil tank
Additional information

47mm Fill point

Material
BS970-1996

Weight
414g

Production process
Investment casting

Surface preparation
De-burred, dipped

Surface treatment
Chromate

Use
simple fill point for moulding into rotationally moulded fuel tanks

Comments
2"BSP thread, 2 x welded points

47mm Fill point

Material BS970-1996
Use simple fill point for moulding into rotationally m...
Additional information

Dip stick part

Material
BS970-1996

Weight
44g

Production process
CNC machining

Surface preparation
Dipped to clean

Surface treatment
Yellow chromate to BS

Use
An holder for a plastic tube which is used as a dipstick

Comments
Machined from standard bar and anti- oxidant applied

Dip stick part

Material BS970-1996
Use An holder for a plastic tube which is used as a di...
Additional information

Dip stick part

Material
BS970-1996

Weight
53g

Production process
CNC machining

Surface preparation
Dipped to clean

Surface treatment
Yellow chromate to BS

Use
An holder for a plastic tube which is used as a dipstick

Comments
Complete kit to include M4 bolt and Brass split pin

Dip stick part

Material BS970-1996
Use An holder for a plastic tube which is used as a di...
Additional information

Lockable fill point

Material
BS970-1996

Weight
314g

Production process
Investment casting

Surface preparation
Dipped to clean

Surface treatment
Yellow chromate to BS

Use
inner section of 4 part lockable fill point for moulded fuel tanks

Comments
part with anti oxidant applied

Lockable fill point

Material BS970-1996
Use inner section of 4 part lockable fill point for mo...
Additional information

Lockable nut

Material
BS970-1996

Weight
449g

Production process
Investment casting

Surface preparation
Dipped to clean

Surface treatment
Yellow chromate to BS

Use
nut for lockable fill point

Comments
part with anti oxidant applied post machining

Lockable nut

Material BS970-1996
Use nut for lockable fill point
Additional information

Lockable nut

Material
BS970-1996

Weight
449g

Production process
Investment casting

Surface preparation
Dipped to clean

Surface treatment
Yellow chromate to BS

Use
nut for lockable fill point

Comments
part with anti oxidant applied post machining showing groove for O ring

Lockable nut

Material BS970-1996
Use nut for lockable fill point
Additional information

2" Fill cap

Material
BS970-1996

Weight
97g

Production process
Investment casting

Surface preparation
Dipped to clean

Surface treatment
Yellow chromate to BS

Use
cap for lockable fill point

Comments
part with anti oxidant applied

2" Fill cap

Material BS970-1996
Use cap for lockable fill point
Additional information

2"BSP lockable fill point. Complete assembly

Material
BS970-1996

Weight
862g

Production process
Investment casting

Surface preparation
Dipped to clean

Surface treatment
Yellow chromate to BS

Use
Fill point for fuel tanks requiring security against theft

Comments
Complete 4 part assembly

2"BSP lockable fill point. Complete assembly

Material BS970-1996
Use Fill point for fuel tanks requiring security again...
Additional information

Bunded Outlet

Material
BS970-1996

Weight
556g

Production process
Investment casting

Surface preparation
Dipped to clean

Surface treatment
Yellow chromate to BS

Use
Fuel outlet for use with bunded rotationally moulded plastic tanks.

Comments
part with anti oxidant applied and threads cut

Bunded Outlet

Material BS970-1996
Use Fuel outlet for use with bunded rotationally mould...
Additional information

Bunded Outlet kit

Material
BS970-1996

Weight
692g

Production process
Investment casting

Surface preparation
Dipped to clean

Surface treatment
Yellow chromate to BS

Use
Fuel outlet for use with bunded rotationally moulded plastic tanks.

Comments
part with anti oxidant applied and supplied with nut and washer

Bunded Outlet kit

Material BS970-1996
Use Fuel outlet for use with bunded rotationally mould...
Additional information

Common connector

Material
BS970-1996

Weight
182g

Production process
Investment casting

Surface preparation
Dipped to clean

Surface treatment
Yellow chromate to BS

Use
Connector for 1" BSP threaded parts

Comments
part with anti oxidant applied and threads cut

Common connector

Material BS970-1996
Use Connector for 1" BSP threaded parts
Additional information

1" bunded outlet

Material
BS970-1996

Weight
768g

Production process
Investment casting

Surface preparation
Dipped to clean

Surface treatment
Yellow chromate to BS

Use
Fuel outlet for use with bunded rotationally moulded plastic tanks.

Comments
part with anti oxidant applied and threads cut

1" bunded outlet

Material BS970-1996
Use Fuel outlet for use with bunded rotationally mould...
Additional information

Torsion spring R

Material
BS5216

Weight
7.3kg

Production process
Coiled

Surface preparation
De-burred

Surface treatment
Powder coated

Use
1 of 2 counter wound springs used to assist in lifting waste bin lids

Comments
Right H wound

Torsion spring R

Material BS5216
Use 1 of 2 counter wound springs used to assist in lif...
Additional information

Bunded lid pin

Material
BS970-1996

Weight
159g

Production process
CNC machining

Surface preparation
Cleaned for coating

Surface treatment
Powder coated

Use
Part used to secure lid to tank via padlock.

Comments
Machined, drilled, tapped and collar welded

Bunded lid pin

Material BS970-1996
Use Part used to secure lid to tank via padlock.
Additional information

Torsion spring L

Material
BS5216

Weight
7.3kg

Production process
Coiled

Surface preparation
De-burred

Surface treatment
Powder coated

Use
1 of 2 counter wound springs used to assist in lifting waste bin lids

Comments
Left H wound

Torsion spring L

Material BS5216
Use 1 of 2 counter wound springs used to assist in lif...
Additional information

Hinge sleeve

Material
0.020 G

Weight
15g

Production process
Rolled

Surface preparation
De-burred

Surface treatment
Galvanised

Use
a metal sleeve to prevent wear in plastic hinges.

Comments

Hinge sleeve

Material 0.020 G
Use a metal sleeve to prevent wear in plastic hinges.
Additional information

2"BSP lockable fill point. Complete assembly

Material
BS970-1996

Weight
862g

Production process
Investment casting

Surface preparation
Hot dipped

Surface treatment
Galvanised

Use
Fill point for fuel tanks requiring security against theft and with protection against extreme weather

Comments
Complete 4 part assembly

2"BSP lockable fill point. Complete assembly

Material BS970-1996
Use Fill point for fuel tanks requiring security again...
Additional information

Bunded Outlet

Material
N/A

Weight
N/A

Production process
3D modelling

Surface preparation
N/A

Surface treatment
N/A

Use
Prototype produced for customer fit / no fit trial.

Comments
Rapid prototype

Bunded Outlet

Material N/A
Use Prototype produced for customer fit / no fit trial.
Additional information

Bunded lid pin

Material
BS970-1996

Weight
N/A

Production process
3D modelling

Surface preparation
N/A

Surface treatment
N/A

Use
Prototype produced for customer fit / no fit trial.

Comments
Rapid prototype

Bunded lid pin

Material BS970-1996
Use Prototype produced for customer fit / no fit trial.
Additional information

Wax mold inner 2" fill point

Material
Wax

Weight
N/A

Production process
From mold

Surface preparation
N/A

Surface treatment
N/A

Use
used to build up shell prior to pouring liquid material into mould

Comments
wax prior to water glass treatment

Wax mold inner 2" fill point

Material Wax
Use used to build up shell prior to pouring liquid mat...
Additional information

Lockable fill point

Material
BS970-1996

Weight
511

Production process
Investment casting

Surface preparation
N/A

Surface treatment
N/A

Use
inner section of 4 part lockable fill point for moulded fuel tanks

Comments
raw casting of 2" fill point

Lockable fill point

Material BS970-1996
Use inner section of 4 part lockable fill point for mo...
Additional information

Lockable fill point

Material
BS970-1996

Weight
312g

Production process
Investment casting

Surface preparation
N/A

Surface treatment
N/A

Use
inner section of 4 part lockable fill point for moulded fuel tanks

Comments
first stage machining of 2"BSP thread

Lockable fill point

Material BS970-1996
Use inner section of 4 part lockable fill point for mo...
Additional information

Lockable nut

Material
BS970-1996

Weight
446g

Production process
Investment casting

Surface preparation
N/A

Surface treatment
N/A

Use
nut for lockable fill point

Comments
2"BSP thread and interior radius cut

Lockable nut

Material BS970-1996
Use nut for lockable fill point
Additional information

2" Fill cap

Material
BS970-1996

Weight
191g

Production process
Investment casting

Surface preparation
N/A

Surface treatment
N/A

Use
cap for lockable fill point

Comments
raw casting of 2" fill cap

2" Fill cap

Material BS970-1996
Use cap for lockable fill point
Additional information

2" Fill cap

Material
BS970-1996

Weight
96g

Production process
Investment casting

Surface preparation
N/A

Surface treatment
N/A

Use
cap for lockable fill point

Comments
post machining of 2" thread

2" Fill cap

Material BS970-1996
Use cap for lockable fill point
Additional information

Tank parts group

Material
N/A

Weight
N/A

Production process
N/A

Surface preparation
N/A

Surface treatment
N/A

Use
Fluid handling parts for plastic tanks.

Comments
Various parts for fuel tanks

Tank parts group

Material N/A
Use Fluid handling parts for plastic tanks.
Additional information

Newel base fixing

Material
Stainless Steel SS306

Weight
450g

Production process
Stamped and welded

Surface preparation
Sand blasted

Surface treatment
N/A

Use
Base fixing for balcony rail uprights.

Comments

Newel base fixing

Material Stainless Steel SS306
Use Base fixing for balcony rail uprights.
Additional information

1" bunded outlet with connector

Material
BS970-1996

Weight
944g

Production process
Investment casting

Surface preparation
Dipped to clean

Surface treatment
Yellow chromate to BS

Use
Fuel outlet for use with bunded rotationally moulded plastic tanks.

Comments
Complete 2 part assembly

1" bunded outlet with connector

Material BS970-1996
Use Fuel outlet for use with bunded rotationally mould...
Additional information

Conversion bracket

Material
Mild Steel

Weight
n/a

Production process
Fabrication

Surface preparation
Dipped to clean

Surface treatment
BZP coating

Use
Bracket which allows the use of odd size lids to industrial waste containers.

Comments
Fabrication & assembly of 2 x parts + Nyloc nut, bolt and washer set.

Conversion bracket

Material Mild Steel
Use Bracket which allows the use of odd size lids to i...
Additional information

Conversion bracket

Material
Mild Steel

Weight
n/a

Production process
Fabrication

Surface preparation
Dipped to clean

Surface treatment
Powder coated

Use
Bracket which allows the use of odd size lids to industrial waste containers.

Comments
Assembly of 3 x parts

Conversion bracket

Material Mild Steel
Use Bracket which allows the use of odd size lids to i...
Additional information

Filter bracket

Material
Mild Steel

Weight
170g

Production process
Stamping

Surface preparation
dipped to clean

Surface treatment
Plastic coated

Use
Bracket on to which is clamped a fuel filter

Comments
Stamped then bent

Filter bracket

Material Mild Steel
Use Bracket on to which is clamped a fuel filter
Additional information

Top hat

Material
Stainless Steel

Weight
318g

Production process
Casting

Surface preparation


Surface treatment
Shot blasted

Use
Retainer for captive bolt

Comments
SS316

Top hat

Material Stainless Steel
Use Retainer for captive bolt
Additional information

Spigot

Material
Mild Steel

Weight
297g

Production process
Casting / fabrication

Surface preparation
dipped to clean

Surface treatment
Plastic coated

Use
Part of fuel station door hinge

Comments
Fabrication

Spigot

Material Mild Steel
Use Part of fuel station door hinge
Additional information

Cleat & stay

Material
Stainless Steel

Weight
n/a

Production process
Casting

Surface preparation


Surface treatment
Mirror polished

Use
For use in yachting

Comments
Nautical

Cleat & stay

Material Stainless Steel
Use For use in yachting
Additional information

Swing bolt

Material
Mild Steel

Weight
46g

Production process
Casting

Surface preparation
dipped to clean

Surface treatment
Galvanised

Use
Used to de-mould parts from a tool

Comments
Sourced part

Swing bolt

Material Mild Steel
Use Used to de-mould parts from a tool
Additional information
[ERROR] 
Query: LOCK TABLES site_visit WRITE
Message: 0